Project

ExportDateTime string

Required

To be determined on export. Hardcoded

Export date and time in UTC. Format is yyyy-mm-ddThh:mm:ssZ (eg 2006-08-08T20:00:00Z) ISO 8601.

Name string

Required

The project or development name.

Owner string

Required

Are assets for the whole project owned by Council or another entity.

Receiver string

Required

The receiver of the ADAC file.

WorksApprovalID string

Optional

The works approval ID for the development that this information represents.

DrawingNumber string

Required

The Council drawing number of the as constructed plans. This may not be known at the time of compilation.

DrawingRevision date

Optional

Date the drawing was revised. ISO 8601 is the accepted format.

ConstructionDate date

Required

The accepted date of construction for the whole project. Usually the project completion date. ISO 8601 is the accepted format. Date may be used to calculate remaining life in an asset management system.

CoordinateSystem structure

Required

Records the particulars of the horizontal and vertical coordinate systems for the whole project.

StructureStructure

HorizontalCoordinateSystem enum

Required

Specifies the horizontal coordinate system used. e.g. MGA56. Well known projections may be referred to by name only. All spatial information in the project will be considered to be referenced to this system. If custom local plane systems or projections are used by agreement with the receiver, then any parameters should be specified in the notes.

Accepted Values

ValueDescription

MGA60 Covers the eastern parts of New Zealand, including the eastern coast of both the North and South Islands.

MGA59 Covers the central regions of New Zealand, both the North and South Islands, areas from Milford Sound in the south up through central New Zealand.

MGA58 Covers a large part of the Tasman Sea and includes the westernmost parts of New Zealand, particularly the west coast of the South Island.

MGA57 Covers the eastern Coral Sea area, and includes some offshore territories or islands.

MGA56 Covers the easternmost part of Australia, including eastern New South Wales, the Australian Capital Territory (Canberra), and Tasmania.

MGA55 Covers southeastern Queensland, including Brisbane, the Sunshine Coast, and Gold Coast, as well as parts of New South Wales (Sydney) and Victoria (Melbourne).

MGA54 Covers most of Queensland, including areas like Rockhampton, Mackay, and extends to Townsville and western parts of New South Wales.

MGA53 Covers the eastern Northern Territory and western Queensland, including Mount Isa and the western Gulf region.

MGA52 Covers the central Northern Territory, including Darwin and Alice Springs, and parts of South Australia.

MGA51 Covers eastern Western Australia, including areas like Kalgoorlie, and extends into the western Northern Territory.

MGA50 Covers central Western Australia, including areas such as Port Hedland and parts of the Pilbara.

MGA49 Covers the westernmost part of Australia, including the western coastline of Western Australia, such as the area around Broome.

Other Specifcy spatial conditions in Notes.

HorizontalDatum enum

Required

To Specifiy the Datum that the Horizontal Coordinate System is based on. E.g. GDA94.

Accepted Values

ValueDescription

GDA2020 Current official datum for Australia, aligned to ITRF2014.

GDA94 Previous official datum for Australia, aligned to ITRF1992.

AGD84 Older Australian datum, replaced by GDA94.

AGD66 Outdated Australian datum, replaced by AGD84 and GDA94.

WGS84 Global datum used by GPS, similar to GDA94.

Other Specifcy spatial conditions in Notes.

VerticalDatum enum

Required

To Specifiy the Datum of Height values. E.g. AHD.

Accepted Values

ValueDescription

AHD2020 Updated vertical datum, based on refined sea level data.

AHD Original vertical datum for Australia, based on 1971 sea level data.

Ellipsoidal Height Height above the ellipsoid, used in GNSS applications.

MSL Mean Sea Level - Average sea level, used globally.

AUSGeoid2020 Geoid model to convert between ellipsoidal and AHD heights.

LMSL Local Mean Sea Level - Local sea level defined at specific tide gauges.

Other Specifcy spatial conditions in Notes.

IsApproximate boolean

Required

Are the values supplied accurate or approximations. If data is plane rectangular approximating MGA-56 then set to true.

OriginMark string

Optional

When data is plane rectangular this is the Permanent Survey Mark used as the origin.

Notes string_multiline

Optional

To contain any additional data required to specify the coordinate system.

DrawingExtents structure

Required

The rectangular coordinate envelope enclosing the project area.

StructureStructure

SouthWest float

Required

The coordinates of the southwest corner.

NorthEast float

Required

The coordinates of the northeast corner.

Description string

Required

Descriptive text summarising the project.

ProjectStatus string

Required

The reason for the ADAC file creation. This is not the same as Asset_status, which is at the asset level. Submission Status is usually related to the development assesment process or to data transfer between entities or systems.

Software structure

Required

Details of the software product used to create the ADAC data set.

StructureStructure

Product String_32

Required

infrADAC ACAD Hardcoded

The name of the software product.

Version String_32

Required

Version Hardcoded

The version or release number of the product.

Surveyor structure

Optional

Structure containing information from the certifying surveyor.

StructureStructure

Name string

Required

The name of the surveyor.

DateFinalSurvey date

Required

The date of the final survey. ISO 8601 is the accepted format.

DateApproved date

Required

The date of the final approval. ISO 8601 is the accepted format.

Engineer structure

Optional

Structure containing information from the certifying engineer.

StructureStructure

Name string

Required

The name of the consulting engineer.

DateApproved date

Required

The date of approval. ISO 8601 is the accepted format.

Attributes