NonGPTSimple

Sqid_Id String_32

Optional

The string identifier of the device, as it would appear on a plan.

Construction enum

Required

The construction method.

Accepted Values

ValueDescription

Prefabricated Prefabricated

Insitu Built or poured in-situ.

Manufacturer String_64

Optional

The manufacturer if applicable.

ModelNumber String_64

Optional

The model if applicable.

TreatmentMeasure enum

Required

Treatment measures applicable to WSUD points that are neither simple nor complex Gross Pollutant Traps.

Accepted Values

ValueDescription

InfiltrationPond Infiltration measure designed to promote infiltration of appropriately treated water to surrounding soils. The primary function of these devices is runoff volume control rather than pollutant removal.

InfiltrationTank Infiltration measure designed to promote infiltration of appropriately treated water to surrounding soils. The primary function of these devices is runoff volume control rather than pollutant removal.

AquiferStorageTank AquiferStorageTank

SandFilter A sand filter is a sand layer designed to filter fine particulates from stormwater before discharging to a downstream drainage system.

EnergyDissipater An installation in a drainage line, usually of concrete or stone, designed to dissipate the kinetic energy of flowing stormwater, to minimise its potential for erosion and damage. Often placed immediately downstream of an endstructure, but may conceivably be anywhere needed in a drainage line.

Function1 enum

Required

The first function of the WSUD point. Must be supplied.

Accepted Values

ValueDescription

SedimentCapture SedimentCapture

SandFiltration Sand Filtration occurs in a sand layer designed to filter fine particulates from stormwater before discharging to a downstream drainage system.

Infiltration Infiltration measures typically consist of holding pond or tank designed to promote infiltration of appropriately treated water to surrounding soils. The primary function of these devices is runoff volume control rather than pollutant removal.

AquiferStorage AquiferStorage

EnergyDissipation The dissipation of kinetic energy from flowing storwater to reduce its potential for erosion and damage.

Function2 enum

Optional

The second function of the WSUD point, if applicable.

Accepted Values

ValueDescription

SedimentCapture SedimentCapture

SandFiltration Sand Filtration occurs in a sand layer designed to filter fine particulates from stormwater before discharging to a downstream drainage system.

Infiltration Infiltration measures typically consist of holding pond or tank designed to promote infiltration of appropriately treated water to surrounding soils. The primary function of these devices is runoff volume control rather than pollutant removal.

AquiferStorage AquiferStorage

EnergyDissipation The dissipation of kinetic energy from flowing storwater to reduce its potential for erosion and damage.

Function3 enum

Optional

The third function of the device, if applicable.

Accepted Values

ValueDescription

SedimentCapture SedimentCapture

SandFiltration Sand Filtration occurs in a sand layer designed to filter fine particulates from stormwater before discharging to a downstream drainage system.

Infiltration Infiltration measures typically consist of holding pond or tank designed to promote infiltration of appropriately treated water to surrounding soils. The primary function of these devices is runoff volume control rather than pollutant removal.

AquiferStorage AquiferStorage

EnergyDissipation The dissipation of kinetic energy from flowing storwater to reduce its potential for erosion and damage.

Length_mm positiveInteger

Required

The length of the device.

Width_mm positiveInteger

Optional

The width of the device.

MaintenanceCycle_mnths positiveInteger

Optional

The minimum maintenance cycle in months. This is the revisit interval for maintenance or inspection, if applicable.

Rotation Float_Direction

Optional

Rotation angle (cartesian - anti-clockwise 0 degrees = East)

Attributes