Skip to main content
WaterSupply / ADAC Version v5.0.1

Hydrant

Represents a water supply hydrant feature.

Geometry: geometry_point_singlepoint
ADAC
ADAC Versions
v4.1 Introduced v4.2 v5.0.1 v6.0.0 LATEST

Attributes

Required and optional XML attributes
Use enum
Required

The purpose of the hydrant in the network.

Accepted Values
ValueDescription
Spring Spring Hydrant.
Filling Point Hydrant (usually of spring type) with a metered standpipe semi-permanently in place.
Pillar Pillar Hydrant.
Diameter_mm positiveInteger
Required

The nominal bore size of the hydrant.

Rotation Float_Direction
Optional

Rotation angle (cartesian - anti-clockwise 0 degrees = East)

WaterQuality enum
Required

The quality of the water being delivered through the hydrant.

Accepted Values
ValueDescription
Drinking Water Drinking-quality (potable) water for normal mains supply by the municipal water service provider.
Recycled Aplus Class A+ tertiary treated with reverse osmosis recycled water for supply via dual reticulation for permitted interior and exterior uses.
Recycled A Class A tertiary treated recycled water for supply via dual reticulation for permitted exterior uses.
Treated Effluent Treated Effluent to class B through class D for irrigation only.
Rain Water Rain Water collected directly into the system for irrigation.
Raw Water Untreated water from a watercourse or pond used to feed a water treatment plant or irrigation system.
Ground Water Untreated water from bores used to feed a water treatment plant or irrigation system.
Process Water Non-potable process water of some description.
Other Pipe conveying some other kind of water (not recycled class B and below which is considered as treated sewage effluent).
Unknown Type of water carried by this pipe is unknown at time of submission.