Connection

SurfaceLevel_m float

Required

Surface level of this feature (in metres against the vertical datum).

InvertLevel_m float

Required

Invert level of this feature (in metres against the vertical datum).

Use enum

Required

The function of the house connection in the network..

Accepted Values

ValueDescription

House House Drain - standard sanitary drain conveying sewage only.

Combined Combined House Drain - a sanitary drain conveying both sewage and storm water in a combined sewerage system.

Diameter_mm positiveInteger

Required

The nominal diameter of the connection conduit.

Material enum

Required

The material of the connection conduit.

Accepted Values

ValueDescription

PVC-U PolyVinylChloride (Unplasticised).

PVC-M PolyVinylChloride (Modified).

PVC-O PolyVinylChloride (Oriented).

CastIron CastIron

RCP Steel Reinforced Concrete Pipe.

DI Ductile Iron.

FRC Fibre Reinforced Concrete.

FRP Fibre Reinforced Plastic.

PE Polyethylene.

SWPP Structured Wall Polypropylene.

AC Asbestos Cement (Existing Assets Only).

VC Vitrified Clay.

M_1 New material not included in schema as agreed with data recieiving entity.

M_2 New material not included in schema as agreed with data recieiving entity.

Unknown Material type unknown at time of data submission.

Other A material not included in schema types provided above.

Class enum

Required

The pipe class as specified by the manufacture. Pipe class refers to the wall thickness and performance of the material.

Accepted Values

ValueDescription

SH Sewer Heavy.

SEH Sewer Extra Heavy.

SN4 Class SN4.

SN6 Class SN6.

SN8 Class SN8.

SN10 Class SN10.

SN12 Class SN12.

SDR21 SDR21

PN8 PN8

PN12 PN12

PN12.5 PN12.5

PN16 PN16

PN18 PN18

PN20 PN20

PN35 PN35

X X

Y Y

Z Z

Unknown Unknown at time of submission.

Other Some other class not included in the standard Schema.

Length_m Float_Positive_NonZero

Required

The material length in metres of the house connection branch conduit.

Type enum

Required

The physical configuration of the valve.

Accepted Values

ValueDescription

SlopedBranch Connection to the reticulation sewer via an oblique junction serving a single property with no change in grade along the inclined property connection sewer with no vertical bends. Also known as Standard or Type A Property Connection.

TwinSlopedBranch Connection to the reticulation sewer via an oblique junction serving 2 properties with no change in grade along the inclined property connection sewer with no vertical bends. Also known as Standard or Twin or Dual Type A Property Connection.

RampRiser Connection to the reticulation sewer via an oblique junction serving a single property where the property connection sewer incorporates either or both a section laid at a steeper grade and vertical bends. Also known as Type B Property Connection.

TwinRampRiser Connection to the reticulation sewer via an oblique junction serving 2 properties where the property connection sewer incorporates either or both a section laid at a steeper grade and vertical bends. Also known as Twin or Dual Type B Property Connection.

JumpUp Connection to the reticulation sewer via a vertical oblique junction serving a single property where the property connection sewer incorporates either or both a section laid at a steeper grade and vertical bends. Also known a Type C or Type D Property Connection.

TwinJumpUp Connection to the reticulation sewer via a vertical oblique junction serving 2-4 properties and incorporating a change in elevation of the property connection sewer via a vertical drop/jump up. Also known as Twin or Dual Vertical Riser, Type C or Type D Property Connection.

SlopedIntoMSBase Connection to the reticulation sewer into the base of a maintenance structure serving a single property with no change in grade along the property connection sewer and no vertical bends. Also known as Standard or Type A Connection.

TwinSlopedIntoMSBase Connection to the reticulation sewer into the base of a maintenance structure serving 2 properties with no change in grade along the property connection sewer and no vertical bends. Also known as Standard or Type A Connection.

RampIntoMSBase Connection to the reticulation sewer into the base of a maintenance structure serving a single property where the property connection sewer incorporates either or both a section laid at a steeper grade and vertical bends. Also known as Type B Connection.

TwinRampIntoMSBase Connection to the reticulation sewer into the base of a maintenance structure serving 2 properties where the property connection sewer incorporates either or both a section laid at a steeper grade and vertical bends. Also known as Type B Connection.

DropIntoMSBase Connection to the reticulation sewer into the shaft of a maintenance shaft or via a drop entry into a maintenance hole and serving a single property. Also known as Vertical Riser, Type C or Type D Connection.

TwinDropIntoMSBase Connection to the reticulation sewer into the shaft of a maintenance shaft or via a drop entry into a maintenance hole and serving 2 properties. Also known as Vertical Riser, Type C or Type D Connection.

Stub Obsolete designation for a connection into a Maintenance Hole, which is no longer used and only retained for backwards compatibility.

Unknown Unknown type of property connection.

Other Some other type of Connection not covered by the standard types.

Chainage_m Float_Positive_Zero

Required

The distance in metres from the centre of the downstream manhole to the point of connection of the offshoot branch.

Offset_m Float_Positive_NonZero

Required

The distance measured square from the centre of the sewer main to the point of connection.

LineNumber String_32

Optional

The line identifier of the sewer main.

DSMHID String_32

Optional

Downstream manhole identifier.

IO_Distance_m Float_Positive_NonZero

Required

Distance from a point perpendicular to the inspection opening to the centre of the downstream manhole along the axis of the sewer main.

SO_Nearest_m Float_Positive_NonZero

Required

Perpendicular distance from the inspection opening to the nearest cadastral boundary.

SO_Other_m Float_Positive_NonZero

Required

Perpendicular distance from the inspection opening to the next nearest cadastral boundary.

Sediment_Trap boolean

Required

True indicates that the connection includes an inline sediment trap.

Attributes